skjflsjfljsljflkjs
The Thermo Scientific™ Antaris™ II is a reliable FT-NIR analyzer that solves a broad range of industrial manufacturing quality control problems by providing timely measurements in the laboratory, at production point-of-use, or in real-time processes.
| Detection | High-sensitivity, high-stability matched InGaAs |
| Interferometer | Proven frictionless, stable, long-life Michelson |
| Instrument Dimensions | 40.6 cm (width) × 68.5 cm (depth) × 33 cm (height) |
| Weight | 47.7 kg |
| Source | Long-life, high intensity halogen NIR source; spare source included with system, guaranteed filament image alignment |
| System Status Indicators | Indicator lights report scan, laser, power, and source status continuously |
| Operator Communication Indicators | Red, yellow and green LED indicators communicate pass/fail/prompt |
| Sealed and Desiccated | Yes |
| Purge | Optional |
| Operating Temperature Range | 15–35 °C |
| Power Requirements | 90–264 VAC |
| Integrated Computing | Optional |
| Communications | Plug and Play USB communications to PC, no addressing or administration required |
| Network and Control System Communications | Direct PC to Ethernet allows file system and OPC communications |
| Regulatory Approvals |  |
| System Performance | |
| Spectral Range | 12000–3800 cm-1 (833–2630 nm) |
| Resolution | 4 cm-1 across spectral range (.6 nm at 1250 nm); 2 cm-1 option across spectral range (.3 nm at 1250 nm) |
| Wavenumber Reproducibility (system to system) | Better than .05 cm-1 (.008 nm at 1250 nm) |
| Wavenumber Repeatability (single system) | 10 measurement standard deviation <.006 cm-1 |
| Wavenumber Accuracy | ±0.03 cm-1 (.005 nm at 1250 nm) |
| Photometric Linearity (USP) | Slope 1.0 ± 0.05 and an intercept of 0.0 ± 0.05 |
| Fiber Optic Module Specifications | |
| Spectral Range | Range is dependent on fiber type and length of probe used |
| Fiber Optic Connection | Standard SMA connection, allowing many probe sampling options |
| SabIR Fiber Optic Probe Specifications | |
| Spectral Range of SabIR Probe | 12000–4000 cm-1 (833–2500 nm) |
| Probe Shaft | Stainless steel shaft 15.8 cm (length) × 1.6 cm (diameter) |
| Fiber Optic Cable | High throughput low OH silica fiber bundle – two or three meter length |
| Window Material | High quality, chemical-resistant sapphire |
| Probe Weight | 0.7 kg |
| Operating Temperature Range | 15–35 °C |
| Remote Start Capabilities | Handheld trigger |
| Background Handling | Automatic background in holster also available |
| Operator communication indicators | Red, yellow and green LED indicators on probe communicate pass/fail/prompt |
| Probe Holder | Holder with built-in Spectralon® reference |
| Fiber Optic Connection | Standard SMA connection |
| Rapid Liquid/Solid switching | Optional transflectance sleeves allow fixed or multiple pathlength settings, avoids primary probe window contamination |
The Thermo Scientific™ iXR™ Raman spectrometer is specifically designed for combination with other analytical techniques, to produce multi-modal analyses. Raman spectroscopy provides the extra dimension of chemical composition and structure of a sample, complementary to the analysis of other techniques.
| Catalog number | Unit Size | Description | Price (MYR) | Availability |
|---|---|---|---|---|
| IQLAADGABFFAHCMBJH | - | iXR Raman Spectrometer | Request A Quote | *** |
Electronic Records and Signatures | CE. UL/CSA/ETL, 21 CRF1040.10 | |||
| Temperature (Metric) Operating | Minimum temperature: 16°C | |||
| Maximum temperature: 27°C | ||||
| Height (Metric) | 37 cm | |||
| Type | Spectrometer | |||
| Laser Power | Absolute excitation laser power at the sample controlled by OMNIC software | |||
| Weight (Metric) | 25 kg | |||
| Width (Metric) | 29 cm | |||
| Power Supply | 100-240 VAC 47-63 Hz | |||
| Depth (Metric) | 44 cm | |||
| Resolution | Full range grating: average 2 cm-1/CCD pixel element | |||
| High resolution grating: average 1 cm-1/CCD pixel element | ||||
| Software Details | Thermo Scientific OMNIC software suite | |||
| Description | iXR Raman Spectrometer | |||
| Unit Size | - | |||
We’ve completely redefined the Raman microscope so that it lets you focus on your work rather than the tools you use to do it. Without sacrificing performance, we’ve built an instrument family around reliability, confidence, and usability. The Thermo Scientific™ DXR™2 Raman microscope and the Thermo Scientific™ DXR™2xi Raman imaging microscope help you solve practical application problems with innovations that improve your ability to get quality information quickly. We’ve put expertise into the software, real world problem solving into the design, and support everywhere in the world.
For investigative researchers in analytical laboratories who need to quickly analyze large sample areas to extract chemical and physical information, the Thermo Scientific Nicolet™ iN™10 MX is an integrated infrared imaging microscope engineered specifically for chemical imaging analysis. Unlike other IR imaging systems, the Nicolet iN10 MX delivers complete sample information, including compound distributions and physical properties from materials in complex matrices, while providing the speed, sensitivity and resolution of traditional infrared microscopy.
The Thermo Scientific Nicolet iS50 FT-IR spectrometer gives definitive answers in your analytical laboratory where fast, easy workflows are essential. No other FT-IR goes beyond your expectations to offer one-touch simplicity,
flexibility and integration in such a small, cost-effective workstation. The Nicolet™ iS™50 is so advanced.
| Spectrometer | |
| Polaris High Stability, Long Lifetime Mid-IR Source | Standard |
| Tungsten-Halogen Near-IR/Visible Source | Option |
| Four Position Source Mirror | Option |
| Continuously Variable Iris Aperture | Standard |
| Gold Optical Coatings | Standard |
| Aluminum Optical Coatings | Option |
| DLaTGS Detector | Standard |
| Three Position Detector Mirror | Option |
| Attenuation Wheel | Standard |
| Validation Wheel | Standard |
| Automated Polarizer | Option |
| Automated Filter Wheel | Option |
| Automated Beamsplitter Exchanger | Option |
| Automated Sample Compartment Purge Shutters | Option |
| A/D Converter | 24 bit |
| Interface | USB 2.0 |
| Software | |
| Operating System | Windows® 7 |
| OMNIC Software | Standard |
| ValPro System Validation Software | Option |
| 21 CFR Part 11 Compliance Tools | Option |
| External Beam Capabilities | |
| Dual Side External Beams | Option |
| Collimated Emission Port | Option |
| Focused Emission Port | Option |
| Side External Detector Port | Option |
| Performance Specifications | |
| Spectral Range, Standard System | 7800–350 cm-1 |
| Spectral Range, CsI Optics | 6400–200 cm-1 |
| Spectral Range, Multi-Range Optics | 27,000–20 cm-1 |
| Optical Resolution, Mid-IR | Less than 0.09 cm-1 |
| Signal-to-Noise, 1 minute scan, Peak-to-Peak, 4 cm-1 | 55,000:1 |
| Signal-to-Noise, 5 second scan, Peak-to-Peak, 4 cm-1 | 13,000:1 |
| Ordinate Linearity | 0.07%T |
| Wavenumber Precision | Better than 0.01 cm-1 |
| Scan Velocity (15 values) | 0.158–6.28 cm/sec |
| Rapid Scan, Spectra Per Second | 65 (at 16 cm-1), 95 (at 32 cm-1) |
| MCT Dewar LN2 Hold Time | 18 Hours |
Trusted by thousands of users around the world, the Thermo Scientific™ Nicolet™ iS10 FTIR Spectrometer set the benchmark for analytical FTIR instruments. Now, the Nicolet iS20 FTIR spectrometer resets the standard and pushes the limits of innovation to the next level. With its redesigned optical engine and modern industrial design, the
Nicolet iS20 spectrometer creates the perfect combination of the instrument platformnFTIR users love with the improvements they need.
Owning a Thermo Scientific™ Nicolet™ iS™10 FT-IR spectrometer means you are up and ready as soon as your instrument is turned on. You do not need to be a spectroscopy expert to get good data from your Nicolet iS10 spectrometer – the expertise is already built into the instrument.
The Thermo Scientific™ Nicolet™ iS™5 FT-IR spectrometer provides the ideal performance and fit for product assurance testing and material identification. Whether you choose the Mid-IR or Near-IR version, this spectrometer delivers maximum confidence and reliability by implementing the same field-proven FT-IR technology found on other Thermo Scientific Nicolet FT-IR models. Driven by award-winning Thermo Scientific™ OMNIC™ software, the Nicolet iS5 spectrometer provides innovative FT-IR solutions and simplicity for businesses large and small.
| Performance* * Factory verified: Specifications are certified on every instrument before it leaves the manufacturing facility. | Spectral range: 7800–350 cm-1 optimized, mid-infrared KBr beamsplitter | |
| Signal-to-noise: 1 minute: 35,000:1 (peak to peak) | ||
| Spectral resolution: better than 0.8 cm-1; better than 0.5 cm-1 using aperture | ||
| Wavenumber precision: 0.001 cm-1 at 2000 cm-1 | ||
| Wavenumber accuracy: 0.05 cm-1 at 2000 cm-1 | ||
| Ordinate linearity (ASTM E1421): <0.15% T deviation from 0.0% T | ||
| Optics | Detector: Fast recovery deuterated triglycine sulfate (DTGS) detector | |
| Source: Mid-infrared Ever-Glo; user replaceable from bottom plate | ||
| Beamsplitter: KBr/Ge mid infrared optimized | ||
| Laser: Temperature controlled solid-state Near-IR diode laser | ||
| Electronics | USB 2.0 high-speed bidirectional communication to PC | |
| Dimensions (W × D × H) | 35 × 28 × 26 cm (13.5 × 10.9 × 10.2 in.) | |
| Weight | 10 kg (22 lb) | |
| Regulatory | Regulatory Approvals: CE, ETL | |
| Performance Verification | Automated performance verification as per ASTM E1421 to meet customer GLP requirements | |
| Internal NIST-traceable 1.5 MIL polystyrene film (serialized) | ||
| Automatic accessory detection and performance verification | ||
| System Suitability tests for complete system performance assurance | ||
| Humidity and Vapor Protection | Tightly sealed and desiccated optical bench with protective KBr windows | |
| Optional ZnSe windows available for environments with excessive humidity | ||
| Rechargeable desiccant cartridges with humidity indicator | ||
| Internal diagnostics with electronic humidity and heat sensors | ||
| Diagnostics | Automatic accessory recognition; Humidity; Temperature | |
| Serviceability | User-replaceable components (without opening cover): – Source – Desiccant – Power supply – Sample compartment windows |
|
| Warranty | 1 year on complete system; 2 years on source; 10 years on laser; 10 years on modulator | |
| OMNIC Software OMNIC software for the Nicolet iS5 spectrometer includes these standard features | Complete collection of spectral processing and analysis tools | Quant prediction for PLS, PCR, Beer’s Law, CLS, peak ratio, and Discriminant Analysis |
| Thermo Scientific™ QCheck™ correlation for material verification | Infrared spectral interpretation with online interpretation guide |
|
| Customizable toolbar and menu options | Spectral Search and Library Manager | |
| User logins and password protection | Automatic atmospheric suppression | |
| Live display of data collection, and spectral data preview | Full-featured report generator | |
| Peak analysis tools: peak area, peak height | Windows® 7, 8 and 10 compatible | |
| Data processing, conversions and corrections | ||
| Minimum PC Requirements | Microsoft® Windows 10 (64-bit), Windows 8.1 (64-bit) or Windows 7 (32-bit or 64-bit) Professional | |
Even the smallest of problems in your manufacturing can cost you time and money. Small contaminants and defects can lead to quality problems that may result in production line shut downs and expensive product recalls. When these issues arise, you need a tool to give you expert answers fast—without the need for an expert. The Thermo Scientific™ Nicolet™ iN™5 FTIR microscope is so intuitive and easy to use; you can get answers in minutes.