Rocket-Evaporator

Sample evaporation with walkaway capability to produce uncompromised results

The Thermo Scientific™ Rocket™ Evaporator is for laboratories seeking to spend minimal time and effort to concentrate or dry large-volume samples for chromatographic analysis.

Product Information PDF

Rocket-Evaporator

Dionex-ASE-150-350

Increase Laboratory Productivity and Sample Throughput

The Dionex ASE 150/350 systems improve productivity by using a combination of elevated temperature and pressure to increase the efficiency of the extraction process. The result is faster extraction times with a significant reduction in solvent use when compared to traditional extraction techniques such as Soxhlet or sonication. Other extraction techniques can take up to 48 hours per sample while the Dionex ASE 150/350 system extractions are typically performed in 12–20 minutes. Solvent consumption is reduced by 50–90% when compared with traditional extraction techniques.

Product Information PDF

Dionex-ASE-150-350

AutoTrace-280-SPE

Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction Instrument

The Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction instrument handles large volume Solid-Phase Extraction (SPE) of liquid samples from 20 mL to 4 liters. The instrument can be configured with 1, 3, or 6 mL SPE cartridges or 47 mm solid-phase disks. The instrument automatically loads liquid samples on the SPE material then automatically extracts the analytes of interests using up to five different solvents.

SPECIFICATIONS
Gas Regulator and Gas Gauge RangeOutput: 0–30 psi (0–1.4 bars), Input: 100 psi (6.9 bars) maximum
Net Weight150 lbs. (68.1 kg)
Dimensions (h × w × d)23 × 25 × 27 in (57 × 63.5 × 69 cm) Sample Rack: 8 × 16.5 × 13 in)
500 & 600 Series EPA Methods24 methods stored in the Dionex AutoTrace 280 SPE instrument
ElectricalVoltage: 100, 120, 220, or 240 V ± 10%
Frequency: 47–63 Hz
Power: 150 Volt AC
Liquid ManagementAir Syringe: One 10 mL air syringe
LH Syringe: One 10 mL liquid handling syringe
12-port Valve: Rotary, sliding Rulon® seal
Valves: 3-way, Teflon®
Nozzles: Stainless steel
Tubing: TFE, 1/16” ID, (6 total supplied)
Sample PumpsDisplacement: Positive
Accuracy: ± 2.5%
Tube Fitting: Kynar®
Piston and Liner: Ceramic
Non Use: Not for use with acetic acid and acetone
Solid Phase Extraction Configurations1 mL Syringe: Compatible cartridge
3 mL Syringe: Compatible cartridge
6 mL Syringe: Compatible cartridge
47 mm SPE disk

Product Information PDF

AutoTrace-280-SPE